High Performance Generic Inverter.
Characteristic
Built-in PI control
Restart/Free run start
PWN frequency 1.5~10KHz
Output frequency 0.5~240.0Hz
10 pattern and any V/F pattern
8-step speed setting
2-step acceleration/deceleration
Parameter input by key number 0~9
External analog setting 0~10V and 4~20mA
Automatic torque compensation and slip compensation
Frequency increase/decrease(UP / DOWN)function and 16-step function control setting
A. 200V 3 phase
Motor rating (KW) |
2.2 |
3.7 |
5.5 |
7.5 |
11 |
15 |
18.5 |
22 |
30 |
37 |
45 |
55 |
75 |
93 |
112 |
131 |
150 |
Model CT2002F- |
2A2 |
3A7 |
5A5 |
7A5 |
011 |
015 |
18A5 |
022 |
030 |
037 |
045 |
055 |
075 |
093 |
112 |
131 |
150 |
Rated current (A) |
11.1 |
18 |
23 |
33 |
48 |
61 |
75 |
86 |
125 |
150 |
170 |
210 |
278 |
330 |
390 |
440 |
500 |
Rated capacity (KVA) |
4.4 |
7.1 |
9.2 |
13.1 |
19.1 |
24.3 |
29.9 |
34.3 |
49 |
60 |
68 |
84 |
111 |
131 |
156 |
175 |
199 |
Power supply | 3∮ 200~230V ±10% , 50Hz/60Hz ±5% | ||||||||||||||||
Output voltage | 3∮ 200V, 220V, 230V | ||||||||||||||||
Cooling system | Forced air-cooling | ||||||||||||||||
Weight (Kg) |
8 |
8 |
9 |
14 |
14 |
20 |
20 |
30 |
45 |
60 |
60 |
65 |
70 |
70 |
70 |
123 |
123 |
B. 400V series
Motor rating (KW) |
3.7 |
5.5 |
7.5 |
11 |
15 |
18.5 |
22 |
25 |
30 |
37 |
45 |
55 |
75 |
93 |
112 |
132 |
150 |
187 |
225 |
262 |
300 |
Model CT2004F- |
3A7 |
5A5 |
7A5 |
011 |
015 |
18A5 |
022 |
025 |
030 |
037 |
045 |
055 |
075 |
093 |
112 |
132 |
150 |
187 |
225 |
262 |
300 |
Rated current (A) |
9 |
13 |
17.3 |
24 |
31 |
38 |
52 |
61 |
65 |
71 |
93 |
110 |
156 |
180 |
225 |
260 |
290 |
370 |
460 |
530 |
610 |
Rated capacity (KVA) |
7.1 |
10.4 |
13.8 |
19.1 |
24.7 |
30.3 |
41.4 |
47.1 |
51.8 |
56.6 |
74 |
87.6 |
124 |
143 |
180 |
206 |
230 |
293 |
364 |
419 |
485 |
Power supply | 3∮ 380~460V ±10% , 50Hz/60Hz ±5% | ||||||||||||||||||||
Output voltage | 3∮ 380V, 400V, 440V, 460V | ||||||||||||||||||||
Cooling system | Forced air-cooling | ||||||||||||||||||||
Weight (Kg) |
9 |
9 |
14 |
14 |
14 |
20 |
25 |
25 |
26 |
40 |
46 |
50 |
65 |
70 |
70 |
93 |
123 |
123 |
123 |
123 |
123 |
370KW and above on request only
C. Standard specification
Control method | Sine P.W.M control | |
Frequency accuracy | Digital setting: ±0.1% Analog setting: ±0.5% (35℃) | |
Frequency resolution | Digital setting: 0.5~100Hz→0.01Hz 100Hz~240Hz→0.1Hz Analog setting: (setting value/1024)Hz |
|
Frequency range | 0.5~240HZ(Initial frequency 0.5~30Hz) | |
V/F ratio | 10 patterns, or any V/F patterns. | |
Torque boost | 0~15.0% voltage boost, automatic voltage boost | |
Accel. / Decel. time | 0.1~6000 sec(linear, two-step setting) | |
Motor Braking | 100% DB. Under 3.7KW Including braking resister. | 20% DB. Connect extra braking resister to reach 100% DB. |
DC Braking | DC Injection Braking(Setting mode, torque, time, active frequency) | |
Standard feature | Free run restart, jogging speed, upper/lower frequency limit setting, jump frequency setting, 8-step speed setting, frequency increase/decrease (UP/DOWN) function, BIAS, frequency indicated output (DC0~10V), operation direction setting, forward/reverse prohibit, voltage/current limit, data lock, multi-step function, auto record when power off, 6 memory pattern of multi-step function. | |
Frequency setting | Digital setting by keypad, or external analog signal(DC0~10V, DC4~20mA) | |
Display | 7-segment LED display: Frequency, current, voltage, setting value, function, fault status, Temperature of PIM module, status of multi-step function, average speed of multi-step function, instant power, power factor, Kwh, Mwh. | |
Protection | Low voltage, over voltage, instantaneous power failure, over voltage stall, overload, over current stall, instantaneous over current, acceleration over current, deceleration over current, over heat. | |
Overload capacity | 150% for 1 min, anti-time limit function, adjustable ( 25~100﹪) | |
Altitude | Altitude 1,000m or lower, keep from corrosive gasses, liquid and dust | |
Ambient Temperature | -10℃~50℃ (Non-condensing and not frozen) | |
Vibration | Below 0.6G | |
Humidity | Relative between 45﹪ to 90% (No condensing) |